· High-power system (132dB Peak SPL@1m) with 10in LF and 1in HF drivers.
· Rotatable asymmetrical horn and unique cabinet architecture ensure versatility.
· User-adaptable for both PA and stage monitoring applications.
· Two-way passive 8O design uses a single amplifier channel for simpler installation and lower cost.
· Sophisticated control electronics ensure reliable, linear operation.
· Supported with a full range of mounting and flying accessories.
Components 1 x 10" (25cm) Shielded Neodymium 8O driver.
HF 1 x 1" throat driver + Low Distortion Constant Directivity Asymmetrical Dispersion Horn.
Height x Width x Depth 515mm x 316mm x 277 mm (20.28" x 12.44" x 10.91").
Weight 14 kg (31 lbs).
Connectors 2 x NL4MP Speakon 4 pole.
Construction Baltic Birch Ply finished with textured black coating.
Fittings 2 Metal recessed pockets.
Front finish Moulded Dark Grey Metal Grill.
Flying Points One plate connecting with external accessories.
Stand fittings Built in Steel Stand Fitting, (35mm / 1 3/8").
SYSTEM SPECIFICATIONS PS10-R2 with PS10 TDController-R2
Frequency Response [a] 65 Hz - 20 kHz ±3dB.
Usable Range @-6dB [a] 58 Hz - 21 kHz.
Sensitivity 1W @ 1m [b] 99 dB SPL Nominal – 97 dB SPL Wideband.
Nominal Peak SPL @ 1m [b] 129 to 132 dB Peak.
HF Dispersion [c] 50° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions.
Directivity Q & DI [c] Q : 16 Nominal DI : 12 dB Nominal.
( f > 3 kHz )
Crossover Frequencies 2 kHz Passive.
Nominal Impedance 8O
Recommended Amplifiers 500 to 1250 W / 8 O.
Electronic Controller The PS10 TDController-R2 is precisely matched to the PS10-R2 & LS600 cabinets and includes
sophisticated protection systems. Using PS10-R2 & LS600 without a properly connected PS10
TDController-R2 will result in poor sound quality and can damage the components.
Dispersion configuration After dismounting front grill from its fixings, the HF Horn can be rotated in 4 positions for dispersion
Sub-bass The PS10-R2 can be used without optional LS600 Sub-Bass. Active two-way operation with the
LS600 is included in the PS10 TDController-R2. One LS600 matches 2 x PS10-R2, additional LS600
may be used for enhanced LF capability.
Speaker Cables PS10-R2 are wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are
present on both. Single identical cables can thus be used to loop through combinations of up to 2 x
PS10-R2 & 1 x LS600 in no particular order.
MAKO-Music ist authorisierter Nexo – Fachhändler!
Gerne beraten wir Sie auch telefonisch unter 08651/1747 oder für Kunden außerhalb Deutschlands: 0049/8651/1747.